|
Post by nosrev on Apr 28, 2018 18:17:50 GMT -5
What Resin can i use? - SparkMaker Resin
- Wanhao UV Resin
- PhotoCentric3D UV DLP Firm
- monocure 3D Resin
- micromake water washable rapid resin
- PhotoCentric3D UV DLP
- Druckwege Resin
Should be working (but not confirmed jet - comment if using one of these successful): - Liqcreate Resin
- FunToDo
- Nova 3d
- XYZprinting
=> You just need to make sure that your chosen Resin cures at 405nm Wavelength! You can confirm Resin working?/You are using other Resins? => Please comment!
Thingiverse Post
|
|
|
Post by printsit on May 12, 2018 9:57:25 GMT -5
Success with:
SparkMaker LCD-T MakerJuice G+ MP Rapid
|
|
|
Post by sparkman on May 16, 2018 13:57:07 GMT -5
just a minor suggestion here - can we share 'successful' settings as well? For instance there are three (?) default settings in our slicing tool. Which default profile could be used? Which settings need to be tweaked?
|
|
|
Post by Guest on May 16, 2018 13:58:45 GMT -5
|
|
|
Post by printsit on May 18, 2018 16:32:54 GMT -5
I suggest using the advanced settings tab.
Something that has worked for me, including mixing 3 different brands together: Layer Height: .025-.0.050
Exposure: 11-15
Exposure Strength: 255
Bottom Layer: 80-99
Lift: 5
Lift Speed: 25-35
Decline Speed: 90-100
|
|
nico66
New Member
Posts: 1 Likes: 0
|
Post by nico66 on May 19, 2018 14:23:55 GMT -5
Hello i use Resin 3D-okay but i don't know what's the best setting are if any people new could you tell me thank you very much good print
|
|